SPARE PARTS DESTEMMERS E10

This is an E-stop for JLB Press and Destemmer Delta E8/E10. Part number: BV P 478280 replacing 385775. See diagram here.

This is an S/S Nut 12mm for the Xpert 250/320 V1/V2/ICS, Xplus 50, RPF 30/40/80, RPZ 70/80/140/150/250, RPS 18/27, RPA 100/150/250/320, RPX 80/140/250 Presses, and E1/2/4/6/8/10 Destemmers. Part number: BV P 730366. See diagram here.

This is an S/S Allen Screw 10x25 for the E2 V1, E6/8/10 Delta Destemmers and Xplus 50/62/80 Inertys/ICS Presses. Part number: BV P 70000789. See diagram here.

This is a Clamping Ring (New Style) for most Air Tubing. Part number: BV P 70001345. No diagram to display.

This is a Limit Switch for the Xpert 320, 100 V2 Presses and E2/4/6/8/10 Delta Destemmers. Part number: BV P 70003069. See diagram here.

This is a Magnet for most Destemmers and Presses. Part number: BV P 70003286. See diagram here.

This is a Crossing Partition for most Presses and Destemmers. Part number: BV P 70004658. See diagram here.

This is a Magnetic Interrupter for the Xpert, Xpro 5/8/15 Presses, E1/2/4/6/8/10, and Oscillys 100/200 Delta Destemmers. Part number: BV P 70007793. See diagram here.

This is the front roller for Destemmer Delta E6/E8/E10. Part number: BV P 00002066. See diagram here.

This is the front axis roller for Destemmer Delta E6/E8/E10. Part number: BV P 00002067. See diagram here.

This is the rear roller for Destemmer Delta E6/E8/E10. Part number: BV P 00002068. See diagram here.

This is the rear axis roller for Destemmer Delta E6/E8/E10. Part number: BV P 00002069. See diagram here.

This is the top roller for Destemmer Delta E6/E8/E10. Part number: BV P 00002070. See diagram here.

This is the finger shaft pin for Destemmer Delta E8/E10. Part number: BV P 2073. See diagram here.

This is the cage drive gear for Destemmer Delta E8/E10. Part number: BV P 00002137. See diagram here.

This is the brass bushing for Destemmer Delta E6/E8/E10. Part number: BV P 00002807. See diagram here.

This is the complete s/s paddle for beater bar on Destemmer Delta E6/E8/E10. Part number: BV P 3415. See Diagram here.

This is the chain drive for Destemmer Delta E8/E9/E10. Part number: BV P 467200 replacing 70003201. See diagram here.

This is a drive belt for Destemmer Delta E8/E10. Part number: BV P 70002989. See diagram here.

This is an O-ring going on Brass Bushing 2807 for Destemmer Delta E6/E8/E10. Part number: BV P 70004325. See Diagram here.

This an O-ring that goes on Busing Brass 2807 for Destemmer Delta E6/E8/E10. Part number: BV P 78868010. See Diagram here.

This is sprocket cage for Main Drive on Destemmers Delta E4/6/8/10. Part number: 2124. See diagram here.

This is a flat washer (holds drive gear) for Destemmer Delta E4/6/8/10. Part number: BV P 1811. See diagram here.

This is a thrust plate cage drive gear for Destemmer Delta E8/10. Part number: BV P 2125. See diagram here.

This is a lift jack for Destemmer Delta E10. Part number: BV P 369278. See diagram here.

This is a Pin (4x30, Grooved) for E6/8/10 Destemmers. Part number: BV P 730314. See diagram here.

This is a Roll Pin 4x40 for the E2/4 version 1 and E6/8/10 (Until 2013). Part number: BV P 730337. See diagram here.

This is a Washing Nozzle for the E2 V1, E2/4/6/8/10, Oscillys XM, and Oscillys 100/200 Delta Destemmers. Part number: BV P 70002484. See diagram here.

This is a Blue Relay (Small) for most Presses, Destemmers, and Pumps. Part number: BV P 70007799. See diagram here.

This is an O-Ring for Brass Bushing #2807 for the Destemmer E6/8/10. Part number: BV P 78868010. See diagram here.