SPARE PARTS DESTEMMERS E4

This is a Limit Switch for the Xpert 320, 100 V2 Presses and E2/4/6/8/10 Delta Destemmers. Part number: BV P 70003069. See diagram here.

This is the rear roller for Destemmer Delta E4. Part number: BV P 1772. See diagram here.

This is the front roller for Destemmer Delta E4. Part number: BV P 1769. See diagram here.

This is the eccentric roller for Destemmer Delta E4. Part number: BV P 1771. See diagram here.

This is the gear cage driver for Destemmer Delta E4. Part number: BV P 00001810. See diagram here.

This is the brash bushing for Destemmer Delta E4. Part number: BV P 00001963. See diagram here.

This is the complete rubber paddle for beater bar on all Destemmers Delta E. Part number: BV P 00003391. See diagram here.

This is the duplex chain for Destemmer Delta E4, Version 1/2. Part number: BV P 467198 replacing 70002639. See diagram here.

This is a drive belt for Destemmer Delta E4/E6. Part number: BV P 70001839. See diagram here.

This is an e-stop (short version) for Destemmer Delta E2/E4. Part number: OTH 00385775 replacing 621506. See diagram here.

This is a pin finger shaft for E4 Delta Destemmers. Part number: 1726. See Diagram here.

This is sprocket cage for Main Drive on Destemmers Delta E4/6/8/10. Part number: 2124. See diagram here.

This is a flat washer (holds drive gear) for Destemmer Delta E4/6/8/10. Part number: BV P 1811. See diagram here.

This bearing is for newer Delta Destemmers E2/4 version 1, E6/8, and F2 Version 2 Crushers. Part number: BV P 343493. See diagram here.

This is a Bearing for the for E4 version 1 /2 and E6/8 Destemmer. Part number: BV P 690831. See diagram here.

This is a Screw Torx Head for the E2/4 Version 1, E6/8/10 (Before 2013), Oscillys 200 (2011) Delta Destemmers, Xpro 5/8, and Xplus 22/30/40/50/62/80 Presses. Part number: BV P 730127. See diagram here.

This is a Washer/Spring S/S 10mm for most Destemmers and Presses. Part number: BV P 730193. See diagram here.

This is a Set Screw for the E4/6/8 Destemmers. Part number: BV P 730237. See diagram here.

This is a Roll Pin 4x40 for the E2/4 version 1 and E6/8/10 (Until 2013). Part number: BV P 730337. See diagram here.

This is a Rubber Cover for the Delta Destemmers E2/4 V1, E6/8, and F2/4 V2 Crushers. Part number: BV P 70002385. See diagram here.

This is a Washing Nozzle for the E2 V1, E2/4/6/8/10, Oscillys XM, and Oscillys 100/200 Delta Destemmers. Part number: BV P 70002484. See diagram here.

This is a Spacer for the E2 V1, E4/6/8, Oscillys 100/200 Delta Destemmers, Xpert 100/115 V1/V2/ICS/IT, and 150/250/320 ICS/V2 Presses. Part number: BV P 70002854. See diagram here.

This is a Drive Belt for the Destemmers E4/6. Part number: BV P 70001839. See diagram here.

This is a Bearing Delta PCJ40 for Destemmers E4/6/8. Part number: BV P 70001841. See diagram here.

This is a Gas Lifter for the Delta Destemmer E4. Part number: BV P 70002659. See diagram here.

This is a Bearing for Delta Destemmers E2/4. Part number: BV P 70002675. See diagram here.

This is a Bearing for Delta Destemmers E2/4. Part number: BV P 70002682. See diagram here.

This is a Limit Switch Body for the E4/6/8 Delta Destemmers, RPF 10/15/22, and RPA 100/150/250/320 Presses. Part number: BV P 621297. See diagram here.

This is an Arm for Limit Switch for E4 Version 1-E6/8 Options Delta Destemmers, RPA 100/150/250/320 Presses, and F4 Version 2 Delta Crushers. Part number: BV P 621298. See diagram here.

This is an S/S Nut 12mm for the Xpert 250/320 V1/V2/ICS, Xplus 50, RPF 30/40/80, RPZ 70/80/140/150/250, RPS 18/27, RPA 100/150/250/320, RPX 80/140/250 Presses, and E1/2/4/6/8/10 Destemmers. Part number: BV P 730366. See diagram here.

This is a Magnet for most Destemmers and Presses. Part number: BV P 70003286. See diagram here.

This is a Crossing Partition for most Presses and Destemmers. Part number: BV P 70004658. See diagram here.

This is a Magnetic Interrupter for the Xpert, Xpro 5/8/15 Presses, E1/2/4/6/8/10, and Oscillys 100/200 Delta Destemmers. Part number: BV P 70007793. See diagram here.

This is a Blue Relay (Small) for most Presses, Destemmers, and Pumps. Part number: BV P 70007799. See diagram here.

This is a Clamp Assy. for the E1/2/4 V2, F2/4, PMV 20C/L, 30L, PM1/2/4/6/8, TRV 20/35, and PMV 1/4. Part number: BV P 75436800. See diagram here.